Industrial manufacturing

Every machine and shift. One plant view.

Changeovers, unplanned stops, rework and energy all eat margin, and most of it is still tracked on paper.

For machine shops, fabricators and equipment plants: live OEE, maintenance, quality and energy on one platform, with FactoryGPT to tell you why a machine stopped.

ithena · industrial manufacturing
Industrial manufacturing industry challenges

High-mix work hides where time goes.

Changeovers, unplanned stops, rework and energy all eat margin, and most plants still track them on paper and spreadsheets.

01

Downtime logged on paper.

Stops, setups and waits end up as one number, so the biggest loss never gets fixed.

02

Repairs wait for breakdowns.

Most work orders still start after a machine fails, so the breakdown sets the schedule instead of the plan.

03

Energy no one sees per part.

Compressors, furnaces and paint ovens keep running between shifts, and air leaks go unnoticed.

How ITHENA solves it

Continuous improvement and production management on a practical AI layer, across every cell.

Layer 1Continuous improvement
iGEMBA

Run the day from the cell board

The walk, the huddle and the actions run on iGEMBA, on one tablet. Every cell’s safety, quality, delivery and people board is ready before the meeting.

  • KPIs at the machine
  • Huddle on the red
  • Actions with an owner
Explore iGEMBA
ITHENA iGEMBA board: safety, delivery, people and quality for the month, day by day in green and red
Layer 2Production management, four tools on one record for every machine
  1. Side view of a CNC lathe turret cutting a part under coolant spray.
    Module 01

    Production Monitoring

    Spindle hours per machine, read off the controller.

    • Live OEE per machine and shift
    • Stops split by cause
    • Cycle time drift alerts
    Explore Production Monitoring
  2. A machinist in a hard hat works at a lathe in a dimly lit shop.
    Module 02

    CMMS | Maintenance

    Maintenance on run hours, calendar or condition.

    • Run-hour and condition triggers
    • Work orders from machine data
    • Signed off on a phone
    Explore CMMS
  3. A machinist measures a finished part at a desk beside a monitor.
    Module 03

    Quality Management

    Every check written to the part’s serial.

    • First-article checks at the machine
    • Live SPC and Cpk
    • NCR and CAPA, each step signed
    Explore Quality Management
  4. Top-down view of molten metal glowing in a furnace ladle.
    Module 04

    Energy Management

    Heat treat, air and test cells metered apart.

    • kWh per furnace and compressor
    • Power quality and peak demand
    • Energy cost per job
    Explore Energy Management
Layer 3Practical AI across all four tools
FactoryGPT

Ask why a machine missed plan

FactoryGPT reads all four tools and the Gemba board, cites every source and raises the work order on your approval.

See FactoryGPT
FactoryGPTReading Production · CMMS · Quality · Energy
Live
Why did HMC-04 miss plan on shift B?

HMC-04 made 38 of 52 parts. It lost 64 minutes: 41 waiting for a fixture after changeover and 23 on a spindle-load alarm. Cycle time held at plan.

  • Fixture wait41 min
  • Spindle alarm23 min
  • Cycle time0 min
Controller logShift planGemba board
Top stops this shift

Three machines account for 104 minutes of stops this shift.

  • HMC-04Fixture wait after changeover41 min
  • Laser L2Nozzle change35 min
  • Press P7Die setup over standard28 min
Controller logsDowntime codes
Which work order first?

WO-7731 on HMC-04. Spindle bearing temperature is up 9 °C in 5 days, and HMC-04 is the bottleneck on next week's plan.

  • Day 161 °C
  • Day 364 °C
  • Day 570 °C
Condition dataCMMSProduction plan
Approve work order WO-7731
How it starts

One machine cell first, then the shop floor.

Pick the cell with the most stops. We connect it, you watch it run live, and each next tool switches on without a second login.

  1. 01

    Connect one cell

    CNCs, lasers, presses or weld cells on the cell that hurts most.

  2. 02

    Watch it live

    OEE, stops and cycle time by machine from the first shift.

  3. 03

    Switch on the next tool

    CMMS, quality or energy on the same asset record.

  4. 04

    Roll out across plants

    iGEMBA boards and FactoryGPT across every cell and site.

Success story

How a US defense manufacturer shortened its lead time.

A US defense manufacturer put the data from its machines and lines in one place with ITHENA, so planning runs on live numbers.

Read the full case study
26%
shorter production lead time
1
place for every machine’s data
Technology partners

Practical AI, built on proven platforms.

Eleven technology partners, to reduce risk and speed delivery.

Get started

Let’s start with one of your cells.

Pick a cell and the machines on it. We connect them and show you these screens with your own machines in them.

  • Production Monitoring
  • CMMS
  • Quality
  • Energy
New - B2B eCommerce Form