Solutions for manufacturers
Plan it, run it, keep it running. One AI-ready plant.
Seven connected products for the plant floor: planning, execution, live OEE, digital Gemba, maintenance, quality and energy, all reading the same machines and orders.
AskWhich line will miss today's plan, and why?
Collective capabilities
Seven products. One plant record from the plan to the meter.
Each product runs on its own. Together they share the same orders, assets and machine signals, so the plan, the line, the maintenance team and the quality gate all see the same facts.
- 01 Plan
iPLAN
A finite-capacity schedule that re-plans when an order or a machine changes.
- 02 Run
MES
Every order from release to finished goods, traced batch by batch.
- 03 Improve
iMEX + iGEMBA
Live OEE on every line, and a daily walk that turns losses into closed actions.
- 04 Sustain
CMMS, QMS, iSEMS
Machines maintained, parts inspected at the station, energy metered per asset.
- One plant data model
- Aether AI assistant
- OPC UA, Modbus, MQTT, S7
- Runs with Ignition
- Mobile at the machine
Product showcase
Start on the line that hurts most. Add the rest when you're ready.
Four products plan and run production, three keep machines, parts and energy in check. Pick one, and each one you add later reads the same machines and orders.
Planning and production
Maintenance and quality
Planning and production01 / 07
iPLANProduction planning
Advanced planning and scheduling, powered by Ortems. A schedule that holds when Monday changes.
- Finite-capacity schedule for machines, crews and tools
- Re-plans rush orders and breakdowns, and shows the impact first
- Maintenance scheduled in the same model
Planning and production02 / 07
iGEMBADigital Gemba walks
Gemba walks that leave a record, not a paper trail, from the daily walk to the huddle after it.
- Every department's KPIs on one board, coloured against your limits
- Huddle actions tracked on Kanban until they are closed
- Trends and root cause from the KPI history
Planning and production03 / 07
iMEXManufacturing excellence
The Industrial IoT platform that shows live OEE on every line and predicts the stop before it happens.
- Connects machines over OPC UA and Euromap 63
- Live OEE and SQDP, with downtime causes by line
- An AI/ML engine that predicts and prevents downtime
Planning and production04 / 07
MESManufacturing execution
MES implemented and integrated across your plants, so every order runs from release to finished goods.
- Real-time visibility of every line from one central view
- Full traceability and batch genealogy
- Rollouts that reuse one standard plant to plant
Maintenance and quality05 / 07
CMMSMaintenance management
Preventive, predictive and breakdown maintenance from one asset register, with every repair on record.
- Plans by calendar, run hours or live condition
- Technicians sign jobs off on their phone
- Every change kept and attributed, audit-ready
Maintenance and quality06 / 07
QMSQuality management
A quality gate at every station, so the defect is caught there and not at the customer.
- Inline and AI visual inspection
- Digital SPC flags drift while the part is still in spec
- NCR and CAPA with e-signatures, genealogy from lot to serial
Maintenance and quality07 / 07
iSEMSSmart energy
Energy metered per asset, not per bill, across water, air, gas, electricity and steam.
- Per-asset energy use and power quality alerts
- Energy cost of every unit produced
- Scope 1, 2 and 3 emissions from the same meters
Benefits
What changes when the plan, the line and the assets share one record.
Losses show up while the shift can still recover them, not in next week's report. These are results from plants running the products.
Shorter lead time
For a US defense manufacturer scheduling on iPLAN.
Higher availability
With live OEE and downtime visibility on iMEX.
Lower maintenance costs
With preventive and predictive work planned in CMMS.
Lower energy costs
With waste found asset by asset in iSEMS.
Which products are in the Manufacturers suite?
Seven. Planning and production: iPLAN (production planning), iGEMBA (digital Gemba walks), iMEX (manufacturing excellence) and MES (manufacturing execution). Maintenance and quality: CMMS (maintenance management), QMS (quality management) and iSEMS (smart energy).
Do we have to deploy all of them?
No. Each product runs on its own. Most plants start with the lines or assets that hurt most, and each product added later reads the same machines, assets and orders.
Which machines and systems can it connect to?
Machines, HMIs and databases over OPC UA, Modbus, MQTT, Siemens S7 and Euromap 63, and through Ignition where you already run it. Order and calendar data comes from your ERP.
How is iMEX different from an MES?
An MES runs the order from release to finished goods. iMEX sits beside it to make the factory reliable: live OEE, downtime causes, digital logbooks and prediction, so you can act before a loss compounds.
Where does AI fit in?
You ask the plan, the maintenance history or the energy data a question in plain language, with no SQL. iMEX predicts downtime before it happens, and QMS runs AI visual inspection at the station.
How long does go-live take?
Weeks, not quarters. iMEX starts with performance monitoring on the lines that hurt most, and iSEMS goes live in about six weeks.
See it on your data
Bring one line, one asset or one KPI sheet. We'll run it live.
A walkthrough of the products you pick, set up around your machines and your plant.
Explore more
Find the right solution for your plant
Tell us which lines, assets or KPIs hurt most. Our team will follow up with the products that fit and a walkthrough on your data.