Every batch on spec, on time, on record.
Recipes, process parameters and batch records leave little room for error.
ITHENA connects the reactors, mixers, kettles and fillers you already run. See every batch phase live, catch a parameter drifting from the recipe before the batch goes off-spec, and close the batch record without paper.
One deviation. An entire batch at risk.
In process and batch manufacturing, equipment failures, recipe deviations, and disconnected production records can lead to costly downtime, inconsistent quality, and lost batches. Yet many manufacturers detect problems only after production is impacted.
One failure disrupts production
Equipment breakdowns, utility interruptions, and process bottlenecks delay batches, disrupt schedules, and reduce plant throughput.
Consistent batch quality is hard to achieve
Recipe variations, process parameter drift, and uncontrolled deviations cause inconsistent yields, off-spec batches, rework, and material waste.
Batch traceability remains fragmented
Paper-based records and disconnected systems make it difficult to trace raw materials, process conditions, quality results, and finished batches.
Continuous improvement and plant operations on a practical AI layer.
Real-time monitoring through SCADA/DCS integration, predictive maintenance, golden-batch quality and digital batch records, working from one record for every unit and every batch.
Run the morning meeting from one board.
Shift handover, control room rounds and the morning meeting run on iGEMBA. Each area’s safety, quality, delivery and people board is ready before the meeting, along with batches released, batches on hold and open deviations.
- Operator rounds and shift handover
- Morning meeting with batch and deviation status
- Actions with an owner and a due date
- Module 01
Batch & Production Monitoring
Live data from your SCADA and DCS, every batch phase by phase.
- SCADA/DCS integration for real-time monitoring
- Batch cycle time vs. standard, yield and losses
- Stops, holds, changeover and CIP time by cause
- Module 02
CMMS | Maintenance
Agitators, pumps, valves, heat exchangers and CIP skids, serviced on run-hours or condition.
- Condition and run-hour triggers
- Predictive work orders, planned between campaigns
- Instrument calibration schedules
- Module 03
Quality Management
Golden-batch comparison, with lab and in-process checks on every batch.
- Quality checklists log and live SPC
- Deviations, holds, NCR and CAPA with signatures
- Raw-material lot to finished-lot genealogy
- Module 04
Energy & Utilities
Steam, chilled water, compressed air and power metered per unit and per batch.
- Energy per batch or per kg
- CIP water and energy use
- Leaks, power quality and peak demand
Ask about any batch in plain words.
FactoryGPT sits behind the four tools and the iGEMBA board. It answers questions about any unit, batch, lot or utility using data from all of them, and cites every source.
Batch 2314 spent 32 of the extra 40 minutes in Heat-up: jacket steam fell to 2.1 bar while the CIP skid drew from the same header. The other 8 minutes were a QC hold for the viscosity result.
- Charge+0 min
- Heat-up+32 min
- React+0 min
- QC hold+8 min
- Cool+0 min
R-118 went into 2 batches and 3 finished lots. Two lots have shipped; one is still in the warehouse.
- FL-7702Batch 2311 · Customer AShipped
- FL-7703Batch 2311 · Customer CShipped
- FL-7710Batch 2314 · Bay 4In stock
3 batches are on hold. The oldest has waited 26 hours on an open NCR.
- B-2317Viscosity out of spec · NCR-041926 h
- B-2319Missing signature at charge5 h
- B-2320Awaiting micro result2 h
One batch line first, then every unit.
Start with the line that loses the most batches. Each new tool turns on without a second login.
- 01
Connect one line
Control system, historian and recipe or batch plan on the problem line.
- 02
Watch it live
Batch progress, deviations and process trends from the first shift.
- 03
Switch on the next tool
CMMS, quality or energy, linked to the same asset and batch record.
- 04
Roll out across plants
iGEMBA boards and FactoryGPT across all units, lines and sites.
How a food plant dropped paper checklists.
A large confectionery and snacks maker moved its maintenance checklists, PM schedules and service tickets into ITHENA, so every check is recorded and traceable.
Read the full case study- 31%
- higher maintenance compliance and traceability
- 32%
- less equipment downtime
- 25%
- higher maintenance efficiency
More industries ITHENA serves.
Other industries where ITHENA keeps lines and batches on spec.
Packaging machinery
Stay close to every machine after it ships.
View industryCompressed air equipment
Keep connected systems running.
View industryCustom tool builders
Turn custom tooling into a connected, self-service digital asset.
View industryFood and beverage
Consistent batches and audit-ready records.
View industryIndustrial manufacturing
Every machine and shift, one plant view.
View industryAutomotive and discrete
See every line and station as it runs.
View industryPharmaceutical manufacturing
Compliance and uptime, batch by batch.
View industryLet’s start with one of your batches.
Pick the line that costs you the most batches. We’ll connect it, show it live, and build from there.
- Batch & Production Monitoring
- CMMS
- Quality
- Energy & Utilities
Get started
Book your demo
Tell us which line loses the most batches and we will set the demo up around it.
The form did not load. Email [email protected] and we will set your demo up for you.