Process & batch manufacturing

Every batch on spec, on time, on record.

Recipes, process parameters and batch records leave little room for error.

ITHENA connects the reactors, mixers, kettles and fillers you already run. See every batch phase live, catch a parameter drifting from the recipe before the batch goes off-spec, and close the batch record without paper.

ithena · process manufacturing
Process & batch manufacturing challenges

One deviation. An entire batch at risk.

In process and batch manufacturing, equipment failures, recipe deviations, and disconnected production records can lead to costly downtime, inconsistent quality, and lost batches. Yet many manufacturers detect problems only after production is impacted.

01

One failure disrupts production

Equipment breakdowns, utility interruptions, and process bottlenecks delay batches, disrupt schedules, and reduce plant throughput.

02

Consistent batch quality is hard to achieve

Recipe variations, process parameter drift, and uncontrolled deviations cause inconsistent yields, off-spec batches, rework, and material waste.

03

Batch traceability remains fragmented

Paper-based records and disconnected systems make it difficult to trace raw materials, process conditions, quality results, and finished batches.

The ITHENA platform

Continuous improvement and plant operations on a practical AI layer.

Real-time monitoring through SCADA/DCS integration, predictive maintenance, golden-batch quality and digital batch records, working from one record for every unit and every batch.

Layer 1Continuous improvement
iGEMBA

Run the morning meeting from one board.

Shift handover, control room rounds and the morning meeting run on iGEMBA. Each area’s safety, quality, delivery and people board is ready before the meeting, along with batches released, batches on hold and open deviations.

  • Operator rounds and shift handover
  • Morning meeting with batch and deviation status
  • Actions with an owner and a due date
Explore iGEMBA
ITHENA iGEMBA board for a plant: safety, delivery, people and quality for the month, one cell per day.
Layer 2Plant operations · Four tools on one record for every unit and batch
  1. An engineer runs a stainless bioreactor from its touchscreen panel, following the batch phase by phase.
    Module 01

    Batch & Production Monitoring

    Live data from your SCADA and DCS, every batch phase by phase.

    • SCADA/DCS integration for real-time monitoring
    • Batch cycle time vs. standard, yield and losses
    • Stops, holds, changeover and CIP time by cause
    Explore Production Monitoring
  2. A technician works the controls of a stainless process skid during planned maintenance.
    Module 02

    CMMS | Maintenance

    Agitators, pumps, valves, heat exchangers and CIP skids, serviced on run-hours or condition.

    • Condition and run-hour triggers
    • Predictive work orders, planned between campaigns
    • Instrument calibration schedules
    Explore CMMS
  3. From behind, a QC analyst in cleanroom gear reviews batch results on a laptop beside lab instruments.
    Module 03

    Quality Management

    Golden-batch comparison, with lab and in-process checks on every batch.

    • Quality checklists log and live SPC
    • Deviations, holds, NCR and CAPA with signatures
    • Raw-material lot to finished-lot genealogy
    Explore Quality Management
  4. A wide view of steam and utility pipe racks in a process plant.
    Module 04

    Energy & Utilities

    Steam, chilled water, compressed air and power metered per unit and per batch.

    • Energy per batch or per kg
    • CIP water and energy use
    • Leaks, power quality and peak demand
    Explore Energy Management
Layer 3Practical AI across all four tools
FactoryGPT

Ask about any batch in plain words.

FactoryGPT sits behind the four tools and the iGEMBA board. It answers questions about any unit, batch, lot or utility using data from all of them, and cites every source.

Explore FactoryGPT
FactoryGPTReading Batch · CMMS · Quality · Energy
Live
Why did batch 2314 run 40 minutes long?

Batch 2314 spent 32 of the extra 40 minutes in Heat-up: jacket steam fell to 2.1 bar while the CIP skid drew from the same header. The other 8 minutes were a QC hold for the viscosity result.

  • Charge+0 min
  • Heat-up+32 min
  • React+0 min
  • QC hold+8 min
  • Cool+0 min
Batch record B-2314Historian · steam PT-101LIMS S-5521
Which finished lots used raw-material lot R-118?

R-118 went into 2 batches and 3 finished lots. Two lots have shipped; one is still in the warehouse.

  • FL-7702Batch 2311 · Customer AShipped
  • FL-7703Batch 2311 · Customer CShipped
  • FL-7710Batch 2314 · Bay 4In stock
Goods receipt R-118Batch recordsWarehouse
Which batches are on hold, and why?

3 batches are on hold. The oldest has waited 26 hours on an open NCR.

  • B-2317Viscosity out of spec · NCR-041926 h
  • B-2319Missing signature at charge5 h
  • B-2320Awaiting micro result2 h
Quality holdsNCR logLIMS
How it starts

One batch line first, then every unit.

Start with the line that loses the most batches. Each new tool turns on without a second login.

  1. 01

    Connect one line

    Control system, historian and recipe or batch plan on the problem line.

  2. 02

    Watch it live

    Batch progress, deviations and process trends from the first shift.

  3. 03

    Switch on the next tool

    CMMS, quality or energy, linked to the same asset and batch record.

  4. 04

    Roll out across plants

    iGEMBA boards and FactoryGPT across all units, lines and sites.

Success story

How a food plant dropped paper checklists.

A large confectionery and snacks maker moved its maintenance checklists, PM schedules and service tickets into ITHENA, so every check is recorded and traceable.

Read the full case study
31%
higher maintenance compliance and traceability
32%
less equipment downtime
25%
higher maintenance efficiency
Technology partners

Practical AI, built on proven platforms.

Eleven technology partners, to reduce risk and speed delivery.

Get started

Let’s start with one of your batches.

Pick the line that costs you the most batches. We’ll connect it, show it live, and build from there.

  • Batch & Production Monitoring
  • CMMS
  • Quality
  • Energy & Utilities
New - B2B eCommerce Form