ITHENA QMS

AI quality management for discrete manufacturers.

Catch the defect at the station where the part is made, on one live quality record.

  • AI visual inspectionVision and gauges check every part.
  • Digital SPCRun rules on live subgroups.
  • Signed NCR and CAPAEach step signed, nothing overwritten.
  • Lot-to-serial genealogySuspect parts found in one view.
iqms · spc
ithenaiQMSOverviewInspectionsSPCNCR & CAPADocumentsAPAnita P.Plant managerQuality / SPCStatistical process controlSearchAPFirst pass yield98.2%+0.6 pts this monthOpen NCRs62 high severityCAPA overdue2-3 vs last monthCpk · bore Ø321.41Capable (≥1.33)SPC · bore diameter Ø32 H7Machine CNC-4 · subgroup n=5 · last 20UCLMeanLCLOut of control · NCR-0418Non-conformancesNCRSTATUSNCR-0418 · bore oversizeOpenNCR-0416 · burr on flangeCAPANCR-0411 · label missingClosedNCR-0409 · coating thinCAPANCR-0405 · wrong torqueClosedDefects by causeMachiningSupplierHandlingAssemblyFirst pass yield, last 8 weeks
9:41InspectionIncoming · lot 4471APSupplier: Apex CastingsPart 7741 · sample 5 of 5AQL 1.0MeasurementsBore Ø32 H732.004OKLength 120 ±0.1120.03OKFlatness 0.050.03OKHardness 52–56 HRC57NOKVisual · porosityNoneOK1 characteristic out of specNCR will be raised on submitSubmit & raise NCRInspectSPCNCRsMe
The challenge

Defects found late cost the most.

A defect made early collects cost at every station after it. An end-of-line check finds it after the work is done.

01

Checks at the end of line

Bad parts ride every station before the final check.

02

Capability studied monthly

Drift shows up weeks after it started.

03

NCRs and CAPAs on paper

Signatures and evidence sit in binders and inboxes.

04

Recall scope by guesswork

Nobody can say which parts share the suspect lot.

What one quality record changes.

  • Caught at the stationVision and gauges check parts where they are made.
  • Drift before scrapRun rules flag drift while parts are in spec.
  • Signed correctionsNCR and CAPA, each step signed.
  • Suspects found fastGenealogy from serial to lot and shipment.
How QMS solves it

One defect, four steps.

From the station where it is found to the lot it came from.

  • Inspect

    Vision and gauges flag the part at the station, and the result is written to its serial.

  • Contain

    The hold raises the NCR with the evidence attached, and genealogy finds the suspects.

  • Correct

    The CAPA runs root cause, action and effectiveness check, with each step signed.

  • Trace

    From one serial to its material lot, sister parts and shipments, in one view.

A hold, followed through

  • Part held at the gateThe result is written to its serial.
  • NCR raisedWith the evidence attached.
  • Suspects quarantinedFound by genealogy.
  • CAPA signedRoot cause, action and check.
  • Record lockedThe audit trail is updated.
QMS services

SPC, golden batch and digital quality logs.

Three services that run on the same quality record.

01

Statistical process control

Control charts and Cpk from live readings. Drift is flagged while parts are still in spec.

02

Golden batch

The settings of your best run are saved as the reference. Each new batch is compared with it as it runs.

03

Digital quality logs

Quality inspection checklists filled in on a phone at the station, signed and stored against the part.

Enter ITHENA

Four parts of one quality record.

SPC, defects, CAPA and genealogy, on one record.

  • Capability, live

    Cpk for each characteristic from live subgroups.

  • Run rules

    Drift flagged while still in spec.

  • Auto-disposition

    Pass, hold or reject from your rule.

  • Connected gauges

    Readings arrive, nobody retypes.

What SPC reads

  • GaugesMeasurements for each subgroup.
  • Inspection plansCharacteristics and limits.
  • Machine stateWhat the station was doing.
  • Vision resultsDefects by type and station.
On the floor

Quality checks in the inspector's hand.

Checklists, holds and signatures on the phone at the station.

Check it at the station

First-article, patrol and line clearance.

Gauge readings arrive without retyping, and overdue checks rise to the top.

Hold it on the spot

A held part stays where it is.

The NCR opens with the image attached, and suspects are found by genealogy.

Sign it there

Who, when and what it means.

Nothing is overwritten, so the record is ready for the auditor.

Success story

Consistent quality, measured at the line.

A global Tier 1 automotive supplier moved quality checks and traceability onto live production data.

“The AI-driven maintenance and traceability system streamlined operations, helping us maintain consistent quality.”Vice President, Manufacturing Operations

Read the full case study
13%
rise in production quality
25%
boost in equipment performance
26%
less energy consumption
1
record from material lot to serial
Technology partners

Practical AI, built on proven platforms.

Eleven technology partners we build on to speed up delivery.

  • Reducing infrastructure cost and increasing productivity through a unified and reliable data environment.

  • Enhancing equipment efficiency, leading to savings in manufacturing, transportation, storage and inventory costs.

  • Empowering businesses to make data-driven decisions with unmatched speed with Incorta's Direct Data Platform.

  • Microsoft Power BI's data visualization tools help businesses modernize apps and make better decisions.

  • Accelerating the deployment of PTC Thingworx and Vuforia platform for digital agility and smart industry solutions.

  • Modernizing businesses with EBS upgrades and reducing the total cost of ownership with Oracle Fusion Apps.

  • Offering a dependable asset localization solution for manufacturing, industrial and commercial sectors.

  • Identifying high-performing content and creating successful strategies for OTT streaming services.

  • Transforming businesses with the best infrastructure, platform, industry solutions and expertise with Google Cloud.

  • Seamless transformation of all IT assets, regardless of complexity or synchronicity, at super-optimized costs.

  • Implementing pre-existing Infor solutions with customized maintenance, optimization and debugging services.

Bring one characteristic.
See it controlled.

Bring last month's NCRs. We will chart one live and walk it to a signed CAPA.